Thermo Scientific 75-004-241 Sorvall ST16 Centrifuge Rotor 75003181 Buckets 8091

Description

Thermo Scientific 75004241 Sorvall ST16 Centrifuge W/ Rotor and Buckets (8091)W Good cosmetic condition with some signs of use. Powers on, responds well to inputs. Rotor reaches 5,000 RPM limit. Centrifuge successfully goes through run. No further testing done. See pictures for more detail.
Thermo Scientific 75-004-241 Sorvall ST16 Centrifuge W/ Rotor and Buckets (8091)W
Good cosmetic condition with some signs of use.  Powers on, responds well to inputs.  Rotor reaches 5,000 RPM limit.  Centrifuge successfully goes through run.  No further testing done. See pictures for more detail.
Manufacturer: Thermo Fisher Scientific
Model #/ Model:
ST16
75004241, 75003181 TX-400, 75003655, 75003682 TX-400
​Included:
Note*
this data was taken from an online source and may not pertain to this particular model.
Thermo Scientific Sorvall ST16 Centrifuge 75004241 75-004-241
​Accel/Decel Profiles: 9 Accel /10 Braking
Drive System: Direct, brushless induction, low-profile
Program storage: 6 programs, direct access
Run Time: 9. hr., 99 min, plus HOLD
Capacity: 4 x 400mL
Rotor: TX-400 (INCLUDED)
Type: Ventilated Centrifuge
Max. RCF: 25,830 x g
Max. Speed: 15,200 rpm
Refrigerated: NO
Hertz: 60 Hz
Voltage: 120 V
Display: Digital
Noise Level: <61dBA
Electrical Requirements: 120V 60Hz
Power Cord (Included)
Thermo Scientific 75003181 75-003-181 TX-400 Swinging Bucket Rotor
​Capacity: 4 x 400mL
Max. Speed: 5,000 RPM
Max. RCF: 4,696 x g
​(x4) Thermo Scientific 75003655 75-003-655 TX-400 Buckets
Type: Swinging Buckets
​Capacity: 4 x 400mL
Max Load: 570 G
Max. Speed: 5000 RPM
Max. Cycles: 50,000
Autoclavable 121°C
Weight Class T
Bio-containment: Yes
ClickSeal BioContainment Lids 75003656 75-003-656 (x4)
(x4) Thermo Scientific 75003682 75-003-682 TX-400 Rotor Adapters
​Description: 15mL Conical
Max. Tube Diameter: 16.5mm
Max. Tube Length: 121mm
Capacity: 15 mL
Tube Type: 15 mL Conical Tube
(x4) Thermo Fisher Scientific 75003683 75-003-683 TX-400 Rotor Adapters
50mL Conical
Max. Tube Diameter: 29.5mm
Max. Tube Length: 116mm
Capacity: 50 mL
Tube Type: 50 mL Conical Tube
(x4) Thermo Scientific 75003657 Swinging Bucket Lids
​Instruction Manual / CD
​Weight: 140 Lb
Dimensions: LxWxH": 24x18x14"
Shipping Weight: 210 Lb
Shipping Dimensions: LxWxH": 36x31x38"
75$ Crating Fee
Sold as is with 30 day Right of Return, only pictured items included
Easy return/refund for any reason
Anacapa Equipment
RETURNS
Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID.
SHIPPING
All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost.
We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID.
LIMITED WARRANTY
Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.
The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty
.
INDEMNITY
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.
Images sell!
Get Supersized Images & Free Image Hosting
Attention Sellers - Get Templates
Image Hosting, Scheduling at Auctiva.com.