-40%
JBL VMA1240 Commercial/Restaurant 240W 70v Amplifier+10) JBL Black Wall Speakers
$ 1058.93
- Description
- Size Guide
Description
Car Audio & VideoPro Audio
Marine Audio
Lighting
Karaoke
Home/Portable Audio
Package: JBL VMA1240 Commercial/Restaurant 240 Watt Bluetooth Mixer/Amplifier with 5 Inputs + (5) Pairs of JBL Control 25-1 5.25" 100w Black Surface-Mount Speakers 4 Home/Restaurant/Bar
Click Thumbnails to Enlarge
Condition and Warranty
Condition:
BRAND NEW IN ORIGINAL PACKAGING
Warranty:
3 YEAR MANUFACTURER
Product Description
Package Includes:
(1) JBL VMA1240 Commercial/Restaurant 240W 70v Bluetooth Mixer/Amplifier, 5 Inputs
(5) Pairs of JBL Control 25-1 5.25" 30w 70v Wall-Mount Commercial Restaurant/Bar Speakers
Authorized JBL Dealer!
Each speaker has a tap switch that you can select 3.7w/7.5w/15w/30w. This amplifier is 240 Watts make sure you do not exceed 200 watts in total
Video of VMA1240 :
Features:
JBL VMA1240 Commercial/Restaurant 240 Watt Bluetooth Mixer/Amplifier with 5 Inputs
5-Input Mixer
Supports USB Drives and Bluetooth
240W, 1-Output Amplifier
Euroblock, RCA, and 1/4" Inputs
Euroblock Outputs
Per-Channel Bass and Treble Controls
Voice-Activated Ducking
Front-Panel Display and Controls
Configurable Output Routing
Includes Rack Mount Kit
Specifications:
Output Power Per Channel: 240 Watts into 4 Ohms or 8 Ohms
Insertion Loss: 70 V and 100 V Outputs: 1 dB Max.
Input Channels: 5
Output Channels: 1
Tone Control: Bass and Treble non-detented potentiometers on each channel
Bass: ±14 dB @ 50 Hz
Treble: ±14 dB @ 10 kHz
Input Sensitivity:
Mic Input: 5.5 mVrms
Line Input: 1.3 Vrms
RCA Input (Stereo In): 130 mVrms
Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output
4/8 Ohms Output: 20 Hz to 20 kHz, ±2 dB
70 V/100 V Outputs: 80 Hz to 15 kHz ±3 dB
Total Harmonic Distortion (THD): Power Amp Output: <0.5%, 20 Hz to 20 kHz
Signal to Noise Ratio: >76 dB
Input Impedance:
Mic: 400 Ohms
Line: 20k Ohms
RCA: 50k Ohms
Phantom Power: 27 VDC
Crosstalk: -70 dB
Nominal Input Voltages: Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz
Minimum Load Impedance:
Low Impedance Output: 4 Ohms
70 V Output: 20 Ohms
100 V Output: 40 Ohms
Operating Temperature: 32°F to 95°F
Humidity: 95% RH
Storage Temperature: -4°F to 185°F
Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches
Product Weight: 25.5 Lbs.
Click here
for the Owner's Manual
Video of Control 25-1:
Description:
Designed by JBL, these Control 25-1 loudspeakers are two-way 5.25" indoor/outdoor monitors featuring weather-protected circuitry, natural and powerful representations of the frequency spectrum, black enclosures, and JBL's proprietary InvisiBall mounting hardware. This hardware allows you to install the speakers through a hidden access point behind its logo badge. As such, the Control 25-1 suitable for venues, health clubs, theme parks, cafes, or anywhere where foreground/background music—and paging—is a necessity.
These monitors are capable of handling 200W of programmatic material at 8 Ohms, and feature a built-in multi-tap transformer for operation on distributed speaker lines. With an SPL of 110 dB, you can blast these speakers pretty loudly as well, while their cone geometry ensures a pleasurable listening experience in both on- and off-axis situations. Additionally, their PEI diaphragms render a smooth high-frequency response. But sound is not the only consideration: Kapton voice coil formers, JBL's WeatherEdge rubberized extensions, and a durable cabinet construction provide protection against heat, rain, wind, or anything else the elements might throw at you in the coming years.
Also, while the Control 25-1 comes in a black finish, it doesn't have to stay that way: these speakers accept a variety of finishes and pigments to match any surrounding.
Features:
2 JBL Control 25-1 5.25" 100w Black Surface-Mount Speakers 4 Home/Restaurant/Bar
5.25" Woven-Fiberglass LF Drivers
0.75" PEI Diaphragm Tweeters
200W RMS at 8 Ohms
Durable, Weatherized Enclosures
InvisiBall Mounting Hardware
Zinc-Plated Grilles
Good for Off-Axis Listening
60 Hz to 20 kHz Frequency Response
Specifications:
Power Rating: 200 W continuous program (2 h). 100 W (400 W peak), continuous pink noise (2 h). 75 W (300 W peak) continuous pink noise (100 h)
Nominal Impedance: 8 ohms (THRU setting)
Maximum Input Voltage: 25.3 V RMS (2 h), 50.6 V peak
Frequency Response± 3dB: 85 Hz to 17 kHz
Frequency Response ±10 dB: 60 Hz to 20 kHz
Sensitivity: 90 dB, 1 W / 1 m (average 100 Hz to 10 k Hz)
Coverage Angle: 100° x 100°
Directivity Factor: 6.0 (averaged 1 kHz to 16 kHz)
Directivity Index: 7.6 dB (averaged 1 kHz to 16 kHz)
Crossover Type: 2nd order low-pass, 2nd order high-pass
Transformer Taps: 70 V: 30 W, 15 W, 7.5 W, 3.7 W, 100 V: 30 W, 15 W, 7.5 W. Insertion loss < 0.94 dB at any tap setting. Thru setting: 8 Ohms nominal
Recommended Protective High-Pass: 60 Hz high-pass (24 dB/oct) (for 8 Ohms operation and for all 70 V / 100 V taps settings)
LF Driver Size: 5.25" / 135 mm
HF Driver Size: 0.75" / 19 mm
Driver Type: LF Driver: Woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp Kapton voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure. HF Driver: PEI diaphragm, low-viscosity ferro-magnetic fluid, and Kapton voice coil former
Enclosure Material: High-impact polystyrene (HIPS)
Grille: Highly zinc-plated, finished in durable TGIC polyester powder-coating
Termination: Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2)
Environmental: IP-44 per IEC529; exceeds MilSpec 810 for humidity, salt-spray, temperature & UV; passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray
Agency Rating: ROHS-compliant; Transformer UL Recognized per UL1876
Dimensions (H x W x D): 9.6 x 7.4 x 5.7" / 243 x 188 x 145 mm
Weight: 7.5 lb / 3.4 kg
Package Weight: 18.0 lb
Box Dimensions (LxWxH): 16.0 x 12.0 x 11.0"
Return Policy
AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.
Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 3 YEAR
If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:
We will send you a
pre-paid shipping label
to replace the item for a brand new one.
We will send you a
pre-paid shipping label
to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
If you are returning a
working item
in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.
Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note
items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.
You
MUST notify us within 48 hours
if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return.
All returns require a RMA# to be returned back to our facility.
Item Code: VMA1240+(5) Control 25-1
Home
/
About Us
/
Contact Us
/
Returns
/
FAQ's
Copyright © 2016
Audio Savings
, All rights reserved. |
eBay Template Design