Autofab Racecars Manual Rack and Pinion Conversion Kit For 64-72 GM A body

Description

Direct Fit Rack and Pinion Conversion Kit 64-72 GM A body (Chevelle/GTO/Cutlass) Autofab Race Cars Inc. rack and pinion conversion kits are among the easiest to install in the industry. Bolts into the factory holes on your 64-72 Chevelle/GTO/Cutlass. All bolt-on brackets and steering arms are powder coated in our attractive silver vein finish. Each conversion kit comes with a Flaming River FR1501 Pinto Style rack, (2) Flaming River "u" joints, billet rack mount, 3/4" chromoly tubing, Autofab Race Cars tie rod end kit, 4130 steering arms and grade 8 hardware. 4130
*Please note that this kit comes with either a 27.5", 27.75, 28", 28.5", or 28.75" rack mount cradle. Please measure from inside of frame rail to inside of frame rail on either side to determine which is correct for your applications. The measurement is taken from the top bolt hole where the original steering box and Idler arm are mounted.
****We can not ship your order until we have this measurement****
Note- No Welding Required
ALL PRODUCTS MADE IN HOUSE!
Please call for time sensitive orders!
Warranty/Return Policy
Customers may return merchandise within 30 days of the original purchase date. All returned items must be in "New" condition and be re-sellable. Defective Parts are covered by the "Manufacturers Warranty" only and are subject to their terms and conditions. All returned shipments must be pre-paid and must have an approved RGA number clearly written on the outside of the package. Please call for RGA number. Returns may be subject to a 15% re-stocking fee. The original shipping and handling charges will not be refunded.
Electrical parts are not returnable for any reason. Defective electrical items must be sent back to the manufacturer for warranty claims.
WARRANTY / DISCLAIMER
on AFRC Products Only
Autofab Race Cars Inc. will repair or replace any product found upon our inspection to be defective in materials or workmanship within 90 days from date of purchase to the original purchaser. Autofab Race Cars Inc shall have no obligation under the foregoing warranty where the defect is the result of improper or abnormal use, vehicle accident, improper or incorrect installation or maintenance, nor when the part has been repaired or altered in any way.
Autofab Race Cars Inc. hereby specifically excludes from any purchase any implied warranty of merchantability or implied warranty of fitness for a specific purpose or use. Any contingent, incidental, secondary or consequential damages of any kind whatsoever are not covered by this warranty. Some states do not allow exclusions or limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific rights and you may be elegible for other legal rights which vary from state to state.
To be eligible for warranty repair or replacement, all parts in question must be returned to Autofab Race Cars Inc. with an approved Returned Good Authorization (RGA) number supplied by Autofab Race Cars Inc. All returned goods must be shipped pre-paid and no Freight collect shipments will be accepted.
The buyer must understand that Autofab Race Cars Inc. does not have full knowledge of the intended use of the goods purchased. Parts may be exposed to many and varied conditions due to the manner in which they are installed and used. Autofab Race Cars Inc. makes no other warranties whatsoever, expressed or implied, oral or written to any purchasers, except that warranty above.