(2) JBL 6.5" Black Commercial Ceiling Speakers+Amp 4 Restaurant/Office/Cafe/Bar

Description

Car Audio & Video
Pro Audio
Marine Audio
Lighting
Karaoke
Home/Portable Audio
Package: Rockville RCS80-1 60 Watt 70v Commercial Restaurant Amplifier/Receiver with Bluetooth +
Click Thumbnails to Enlarge
Condition and Warranty
Condition:
BRAND NEW IN ORIGINAL PACKAGING
Warranty:
1 YEAR AUDIOSAVINGS
Product Description
Package Includes:
(1) Rockville RCS80-1 60 Watt 70v Commercial/Restaurant Amplifier/Bluetooth Receiver
(1) Pair of JBL CONTROL 16C/T-BK 6.5" 30w 70v Commercial Ceiling Speakers 4 Restaurant/Bar
Video of RCS80-1:
Includes:
Amplifier
Remote
Rack mount ears
Power Cable
FM Radio antenna
Owner’s manual
Warranty
Description:
Rockville is proud to introduce the first commercial amplifier in our new RCS series of products.
The RCS80-1 is a 60 Watt single zone rack mountable digital hybrid amplifier/receiver. This amplifier is capable of
70 volt, 100 volt, 8 ohm, and 4 ohm applications.
This makes it perfect for use in a Restaurant/Bar/Café/Lounge/School/Conference room or any other setting where multiple speakers are needed. With the dual mic inputs you can use this amplifier for announcements, speeches or even for Karaoke night! The
RCS80-1 features Bluetooth audio streaming so you can play your favorite music or access a playlist right from your phone!
This amp also features both USB and SD inputs allowing you to play audio stored on a USB thumb drive or SD Card. Individual volume knobs for two microphones, MP3, and line inputs allow for full and autonomous control of this amplifier. The built in cooling system in this amplifier will keep the components cool making the amplifier durable and reliable.
Our goal with the RCS series was to make it possible for anyone to install 70 volt systems on their own without spending thousands of dollars on a contractor. This model makes it a breeze to connect any audio device such as a cd player, mp3 player, television etc.
What Is 70 Volt Technology?
70 volt systems are the number one choice for any application where you want to install many speakers. With 70 volt there are a lot of advantages over 8-ohm systems. One of the main advantages is the simplicity of the wiring as well as how easy it is to match up speakers with the amplifier. For example, with this 60 watt / 70 volt amplifier, you can install speakers that total around 50 watts. It does not matter if it is 10 speakers that are 5 watts each or 20 speakers that are tapped at 2.5 watts each. You always want your 70 volt amp to have at least 15 or 20% more power than the combined watts your speakers are tapped at. When we say the word tap, what we are referring to are the selectors that many speakers in 70 volt have on them. For example, some speakers might have selectable options of 1.5w, 3w, 5w, 10w. What this does is limit how many watts the built-in transformer on the speaker will allow the speaker to get from the amplifier. What this allows for is full customization of your sound for your space. In a restaurant for example you can tap your dining room speakers at 5 watts, the speakers by the bar area at 10 watts, the ones in the hallway at 3 watts and the speakers in the bathrooms at 1.5 watts.
Another great feature with 70 volt is you can mix and match any 70 volt speakers whether they are ceiling speakers, wall mounted speakers, subwoofers, etc.
70 volt systems allow you to run very long lines of speaker wire without signal loss. This makes it ideal when running long speaker leads.
The wiring is simple. You just wire all the positive terminals of the speakers to the positive 70 volt terminals of the amplifier. The negative terminals on the speaker simply get wired to the negative terminals on the amp. You do not have to worry about impedance. The power is constant.
If you want an easy to use feature-rich 70 volt amplifier the Rockville RCS80-1 is your best choice!
Applications:
Restaurant
Bar
Café
School
Conference room
Lounge
Features:
Rockville RCS80-1 60 Watt Commercial/Restaurant Amplifier 19" Rack-Mountable (Removable Rack Brackets) Digital Hybrid Amplifier/Receiver
Capable of 70 volt, 100 volt, 16 ohm, 8ohm, and 4 ohm
70/100 volt True RMS Power: 60 Watts
4 ohm RMS power: 80 Watts
8 ohm RMS power: 70 Watts
16 ohm RMS power: 11 Watts
Built in Bluetooth audio streaming
FM radio tuner
USB input to play audio stored on a thumb drive (32gb max)
SD card slot to play music stored on an SD Card (32gb max)
Separate volume control for MIC1, MIC2, MP3, LINE1, LINE 2 input
Bass and Treble control
5 segments signal level indication
Built in cooling system keeps component cool at all times
Inputs and Outputs:
(2) Sets RCA AUX inputs
(2) Mic inputs
RCA REC output
100V speaker red positive speaker output terminal
70V speaker red positive speaker output terminal
8 Ohm red positive speaker output terminal
Shared negative speaker output terminal
Specifications:
Distortion: <0.5% (1kHz)
Signal to Noise Ratio: > 79dB
Power Requirements: 120V / 50-60Hz
A Weighted Signal to Noise (@ 1W) -79.0dBA
A Weighted Signal to Noise (referenced to full 4 ohm power) -95.1dBA
Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 8 Ohms <10Hz – 22.8kHz
Frequency Response vs THD+N (worst case, across normal bandwidth 1W @ 8 ohms) 0.82%
Weight: 10.03lbs
Dimensions: 16.9” x 9.45” x 2.76” inches
Owner’s Manual
Authorized JBL Dealer
Description
of CONTROL 16C/T-BK
:
Two-Way 6.5" Coaxial Ceiling Loudspeaker
Control 16C/T is a full-range ceiling speaker consisting of a 165 mm (6.5 inch) high tech cone driver and a 19mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blindmount backcan for quick and easy installation.
​
Features:
(2) JBL CONTROL
16C/T-BK
6.5" 30 Watt 70v Commercial Ceiling Speakers For Restaurant/Bar in Black
Components:
165 mm (6.5 in) high output driver with polypropylene cone and butyl rubber surround
19 mm (0.75 in) soft-dome liquid-cooled tweeter
Blind-mount backcan for quick and easy install
Dual conduit/cable clamps
Combined 70V/100V and low impedance direct operation
50 Watts at 8Ω nominal setting
30W multi-tap at 70V/100V
62 Hz – 20 kHz bandwidth with wide 110° coverage
High 91 dB sensitivity for high maximum SPL
Black (-BK)
Specifications:
Frequency Range (-10 dB): 62 Hz – 20 kHz
Power Capacity (at low-Z)
100 Watts Continuous Program Power
50 Watts Continuous Pink Noise
Transformer Taps: 30 W, 15 W, 7.5 W @ 70V or 100V (plus 3.8 W @ 70V only)
Frequency Response (±3 dB): 96 Hz – 15 kHz
Nominal Sensitivity: 91 dB
Nominal Coverage Angle: 110° conical coverage
Directivity Factor (Q): 7.8
Directivity Index (DI): 8.2 dB
Rated Maximum SPL: 108 dB @ 1 m (3.3 ft) average, 116 dB peak
Nominal Impedance: 8 ohms (in direct/bypass 8Ω setting)
Crossover Network
12 dB/oct (2nd order) low-pass to LF driver,
12 dB/oct (2nd order) high-pass to HF driver
LF Driver: 165 mm (6.5 inch) with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high temperature voice coil
HF Driver: 19 mm (3/4 in), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide dispersion waveguide
Input Connector: Removable locking 4-pin connector with screw-down terminals.
Max wire size 12 AWG (2.5 mm2)
Connector Wiring: Pin 1 = + In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru
Strain Reliefs: Strain relief for two cables or two flex conduits via coupled clamping mechanism
Materials: ABS baffle with UL94-V0 and UL94-5VB flame class fire rating; Zinc-plated
steel backcan
Safety Agency: UL1480, UL2043, NFPA90 & NFPA70; S7232/UL Listed, Suitable for use in air handling spaces, Signaling Speaker; Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/EN60849 systems
Dimensions
253 mm diameter x 225 mm depth from back of baffle
(10.0 in diameter x 8.8 in depth)
Ceiling Cutout Size: Circular cutout with 223 mm (8.8 in) diameter (cardboard cutout
template included)
Ceiling Thickness Range: Up to 38 mm (1.5 in) with stock dog-ears. MTC-TCD thick-ceiling dog-ears available for up to 60 mm (2.4 in) ceiling thicknesses
Safety Seismic Attachment: One point, top surface
Net Weight: 3.4 kg (7.4 lbs, one speaker)
Shipping Weight: 11.2 kg (24.7 lbs, pair in master carton)
Included Accessories: C-ring support backing plate, 2 tile support rails (for 2 ft or 600 mm tile spans; optional MTC-48TR extension available for larger 4 ft or 1200 mm tile spans), cutout template, paint shield, removable locking multi-pin connector, grille
Optional Accessories
MTC-26NC new construction bracket
MTC-26MR mud-ring construction bracket
MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 60 mm (2.4 in, ordering one set = 24 dog-ears for 6 speakers)
MTC-48TR tile rail for 1200 mm (4 ft) tile spans
Advantages of purchasing from an authorized seller:
·         Best prices - We sell all JBL Products at wholesale prices
·         Full Factory Warranty
·         Detailed information of all products
·         Lifetime Customer Service by JBL product Experts
·         Guaranteed legitimate and authentic merchandise
Please note:  If you purchase JBL from an un-authorized seller then you are taking a big risk.  You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new,  or even working.
Return Policy
AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.
Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 1 YEAR
If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:
We will send you a
pre-paid shipping label
to replace the item for a brand new one.
We will send you a
pre-paid shipping label
to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
If you are returning a
working item
in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.
Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note
items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.
You
MUST notify us within 48 hours
if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return.
All returns require a RMA# to be returned back to our facility.
Item Code: RCS80-1+CONTROL 16C/T-BK
Home
/
About Us
/
Contact Us
/
Returns
/
FAQ's
Copyright © 2016
Audio Savings
, All rights reserved.  |
eBay Template Design